Parts

Our Milhouse Handlebar has the distinction of being the first and only of its kind: A full carbon moto-inspired riser bar. Featuring a 16-degree backsweep and 8-degree upsweep for comfort and control, it's tested and approved for getting rad on the roughest terrain. A statement piece for custom builders and upgraders alike, the Milhouse is equally at home on klunkers, bikepacking rigs, singletrack steeds, or simply cruising the streets with style. Trimmable ends marked with easy-to-read graphics allow you to dial in your fit for maximum confidence wherever the trail takes you. - Unidirectional carbon fiber construction - Trimmable ends, made easy with graphic markings - No rider weight limit - ASTM Condition 3 – For rough off-road riding and jumps less than 24" - 90mm clamping area to fit Salsa Anything Cradle - 31.8mm clamp, 70mm rise, 16-degree backsweep, 8-degree upsweep - 825mm wide - Weight: 288g

If variety is the spice of life, then the Moloko bar oozes umami at every bend. It offers a multitude of hand positions to keep you comfortable and in control over the course of a long day riding over varied terrain. It also has plenty of spots to mount your various accessories. Dangle a handlebar bag from it, strap some lights to it, throw a GPS on it (if that's your thing), and ride all day. It comes in a standard width of 735mm but if 685mm is more your style, don't you worry. Surly added cut marks so you can easily make it so. - Material: CroMoly steel - Clamp diameter: 31.8mm - Width: 735mm; Cut marks for 685mm - Rise: 0 - Sweep Angle: 34 degrees - Weight: 709g - Color: E.D. coated Black

Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch

No matter how difficult the trail terrain, Magura's 4-piston technology and novel new ergonomics in the brake lever give you a performance package which will fill you with confidence. The MT5 is also perfect for S-Pedelecs. The aluminium, two-finger brake levers are ergonomically perfect for your hands, allowing you to easily and accurately apply the braking power you need, even during long braking actions. Their use of Carbotecture technology in the brake handle housing keeps the MT5's weight down to a minimum and provides optimal braking performance. - An evolution of the MT line, the MT NEXT lineage of brakes is the next generation of braking performance - Carbotecture Body which is a proprietary carbon weave that is nearly twice as strong as carbon laminates, aluminum or magnesium - Carbotecture radial design master-cylinder/lever with 2-finger alloy lever blade and clamp with adjustable reach, flip/flop design, and EBT or Easy Bleed Technology port on reservoir - Double Arch forged 4 piston monoblock caliper design that features anti-heat, anti-drag and anti-squeal and magnetiX brake pad system for easy pad replacement - Full-hydraulic Magura Royal Blood mineral oil system with a 5-year leakproof warranty - Includes flip/flop front or rear lever, 2000mm pre-bled tubing kit, 74mm post-mount caliper, MC/lever, alloy hardware, tubing shortening bits, and manual

The Ergon grip with a full size, multi-position bar end for maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling. Perfect for commuting, touring, or for those who like a longer bar end. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP5 eliminates numb hands, aching fingers, and tired forearms. The GP5 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Not suitable for use with carbon handlebars - Uses: touring, commuting - Clamp: fiberglass composite with rubber inserts

The SRAM RED AXS Crank Arm Assembly features hollow carbon Exogram crank arms for a lightweight, strong, and elegant crank. It can be paired with any SRAM AXS spider or integrated chainring, with or without power. - The 8-bolt interface is compatible with power and non-power AXS spiders and integrated chainrings - Not compatible with SRAM's 3-bolt direct mount interface - Hollow Exogram carbon arms - Spider and chainrings sold separately - DUB spindle interface - Compatible with all SRAM Road DUB bottom brackets - Number of Chainrings: No Rings, No Spider Included - Crank Intended Use: Road, Tri, Cyclocross - Pedal Spindle: 9/16" - Spindle Interface Type: SRAM DUB - Chainring BCD: Direct Mount SRAM - BB Included: No

On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering methods, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems. - Class-leading stiffness-to-weight ratio - More options for a better fit - New faceplate and geometry for greater stiffness and easier installation - Distinctive silver finish

Whisky's No.7 12F is their most versatile drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 12° - Measured Center-to-Center at the levers

The day-in, day-out Eagle ecosystem hero is now available with AXS. The GX AXS upgrade kit is your entry point into wireless drivetrain simplicity. Compatible with any of our Eagle ecosystem cassettes and crank arms, the upgrade kit allows you to experience AXS without needing to buy an entire groupset—provided you already are using Eagle products. No matter if you are looking to upgrade your ride or looking for great value replacement parts, look no further than the GX AXS upgrade kit. - Includes the SRAM GX Eagle AXS rear derailleur with battery, Eagle controller with clamp, charger with cord, and chain gap tool - The GX Eagle AXS rear derailleur shifts on command, whether under climbing load or sprinting to the stage finish, and is smart enough to protect itself thanks to its incredibly resilient Overload Clutch - Rear derailleur is compatible with 10-50t and 10-52t cassettes - The GX Eagle AXS controller offers a unique wireless shifting experience with ergonomic touchpoints that are customizable to your preferences. You can choose what each button does through the AXS App

- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 31.8mm handlebar clamp - Heat treated hardware - Weight: 152g (100mm)

Globally renowned and truly timeless, the B17 S Standard is the saddle that secured Brooks' place in cycling history. It's been in constant production since 1910, providing cyclists around the world with over one hundred years of sublime support and unrivaled comfort. Each B17 S Standard shapes itself to its rider, leading to a personal, customized saddle that fits like no other. The S models are shorter and wider than a normal B17 and are uniquely suited to women riders. And of course, it features Brooks' full grain, premium leather top secured by their trademark rivets for the ultimate in style and durability.

Pairing the versatile GXP bottom bracket platform with hollow carbon Exogram arms, the SRAM RED crankarm assembly is light, strong, and elegant. It can be paired with any SRAM AXS spider or integrated chainring, with or without power meter. - 8-bolt interface compatible with power and non-power AXS spiders and integrated chainrings - Hollow Exogram carbon arms - BB/Spider/Chainrings not included

Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power. - Designed specifically for heavy-duty demands. - Pivot bearing offers crisp lever feel and a fatigue-free ride. - Metallic pads come standard for more power and longer wear.

Dual-sided "Pop-Up" clipless pedal with AL6061 die-cast body and CNC platform - LSL sleeve bushing and sealed bearing - 9/16" CNC machined Chromoly spindle - Shimano SPD style cleat with 15º float - Platform size: 105mm x 103mm

ZEB Ultimate is a whole new breed of fork, designed to challenge the limits and take on the world’s toughest Enduro tracks. Going Ultimate has its advantages—this fork has a stiff, 38mm chassis designed with the Charger 2.1 damper, DebonAir spring technology, SKF Wiper Seals, and Maxima Plush Fluid. It pairs our highest performing, athlete-proven technologies with premium style. - New, 38mm chassis for increased stiffness and rider confidence - Updated, highly tunable DebonAir spring offers a buttery-smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Charger 2.1 RC2 damper features independent high and low-speed compression adjustments - Dual Position Air adjustment option to change the geometry of the bike for climbs and descents - Ultra-low-friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Ultimate foil graphics package

The Surly Truck Stop Handlebar combines the benefits of a drop bar with those of a riser bar. Offering a variety of hand positions for comfort over the long haul, it also features 30mm of rise for a more upright and relaxed riding position. With a clean aesthetic, it’s a great option for taller riders looking for more rise and for bikes with a low-cut steer tube. - Lightweight, aluminum construction - Available in various widths - 31.8mm clamp diameter

For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more. - 15mm thru-axle with 110mm Boost spacing - Post-style brake mount - 1.5" tapered carbon steerer - Two sets of Three-Pack mounts - ASTM Condition 3 - For rough off-road riding and jumps less than 24"

Dimension Steel Cogs are splined for BMX and singlespeed hub compatibility. - Steel with chrome finish - Cogs are splined for Shimano BMX and singlespeed hub compatibility - Compatible with 1/2-inch and 1/8-inch chains

- Pedal body made of ruggedly durable engineering-grade thermoplastic - LSL sleeve bushing and sealed bearing - 9/16" CNC machined Chromoly spindle - 10 M3-8mm replaceable pins per side - Platform size: 113mm x 105mm - 350g per pair

Oury single sided V2 lock-on grips.

With a classic 25.4mm clamp diameter, the extra-tall 30mm of rise gives way to comfort and added control for an economic option for any classic mountain bike build. - Material: 6061 alloy - Width: 670mm - Rise: 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 25.4mm - Bar-end compatible: yes - Weight: 399g

Grippler gives you the moisture shedding, long gripping sensation you crave, with the hard wearing resilience you expect from Race Face. Our proprietary compound and diamond buff finish feels great with both gloves and bare hands - and with ramped grip profile on finger-side plus varied grip depth on palm-side, Grippler will bring you to a higher level of digitization. Available now in 10 colours, and two sizes, the Grippler surpasses industry standards for gripabilty. And now with Double Lock Ons the Grippler EVEN GRIPS ITSELF. Get a grip, with the Grippler. - Directional ramped logo underside - Proprietary compound extends over Dual Lock Ons - Vibration dampening, hard wearing, moisture shedding

Shimano's Deore XT Rear Derailleur uses cold-forged construction and cutting edge technology to deliver crisp shifting, real-world reliability, and trademark precision. Plus-type derailleurs use a lever-actuated clutch spring to prevent chain slap, reduce noise while on the trail, and improve chain engagement when riding over rough terrain. Sealed pulley bearings keep things spinning smoothly, and wide plate construction prevents the derailleur from getting clogged with mud and debris.

The Shimano Claris ST-R2030 is a dual control brake/shift lever for Shimano 2x8 and 3x8 drivetrain applications. It features a reach adjust mechanism and Shimano's Super SLR friction-reducing technology. - Reach Adjust mechanism allows for the distance from the handlebar grip to the lever to be adjusted to suit any hand size or riding style - Super SLR technology improves braking response and modulation by reducing friction through the caliper, lever, and cable - The Dual Control Lever has both brake and shifting functions in the system to enable simple operation - Includes OT-SP41 cable housing to maximally reduce the inner cable friction for quick response to operations and effortless shifting

- Compatible with 6 and 7-speed SIS Index Shifting drivetrains - Includes BMX/track frame hanger

The Ergon GE1 Evo Factory is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday.

Fat Paw grips were developed for riders who crave large-diameter grips that also have a soft feel. The 9.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands. - 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability - Tacky texture provides excellent grip with or without gloves in all weather conditions - Includes bar end plugs

Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)

The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru-axle system.

The STYLO 6K DUB crankset delivers consistent performance every time out. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. 6000 series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - 6003 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 135/142 MTB Hubs

Elevating the shift, expanding the capable, the X01 Eagle derailleur features an updated cage architecture to provide better chain management than ever. The X01 Eagle rear derailleur works with the new 10-52T cassettes and is backward-compatible with 10-50T options, as well. - Updated cage provides better chain retention and more precise shifts - Backward-compatible design works with 10-50T and 10-52T cassettes

Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.

- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm Features - Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - Material: MGR Super 6 Alloy - Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm) - Sweep: 4° up x 8° back - Finish: Shot peen anodized, decal logos

- Tailored to the latest lightweight and uber-capable trail bikes, the all-new Deluxe Ultimate offers a fully-checked damper design featuring Low Speed Compression adjustment and optimal traction control tuning. - Featuring the new DebonAir+ air spring with new air can options, a wider range of rebound adjustment, more tuning capabilities than ever before, and increased bushing overlap for improved small bump performance and grip.

The Crank Brothers Mallet E 11 is the premium version of the ideal enduro racing pedal. The specs say it all. - Titanium wings to reduce weight - Dual chamfered edges to reduce rock-strikes - Exclusive double-anodized black and gold colorway - Concave platform for secure foothold - 6 adjustable pins per side for grip - Traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - 52mm q-factor for maneuverability on tight trails - Hex alloy endcap for durability - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system

The Tourney TY501 crankset provides crisp, reliable shifting for your triple chainring drivetrain. - Precision indexed shifting - 8/7/6-speed compatible - 3 crank length specification available - Precise chain line control - Light and reliable shifting - Versatile performance - Wide compatibility with multiple components - Quick and precise assembly

LOOK Trail Grip pedals with Activ Grip by Vibram rewrite performance and personality rules for off-road riding. Unique, mountain peak-evolved, composite stud and rubber lug tread inserts give brilliant bike control and slip free security without trashing your shoes or your shins. Race-bred bearings and four switchable colors deliver smooth style. - Technology: Flat pedals + LOOK Activ Grip by Vibram - Body: Composite - Traction: Vulcanized Rubber Activ Grip + Composite studs - Spindle: Chromoly+ - Surface area: 107x103mm - Weight (pedal): 265g - Weight (pair): 530g

With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7120 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7120 4-piston caliper is optimized for the toughest enduro trails. - 10% stiffer than previous generation M7000, even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free lever reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup - Includes finned metal pads

The Ergon GE1 Evo is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday. - Length: 135mm - Lock On: Yes - Weight: 105g

Long hours in the saddle? No problem with the SM Comp Men. This male-specific all-around MTB saddle is great for touring, trail and all-mountain riding. It offers the highest level of comfort through the anatomically optimized relief channel and orthopedic comfort padding. OrthoCell-Inlays in the seating area generate the best possible pressure distribution. The innovative OrthoCell material ensures maximum reset forces and is also more durable and lighter than gel. The flattened rear and the Y-shape guarantee full freedom of movement when in the typical MTB riding position. Sliding flanks help reduce friction when pedaling.

The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio

SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. Shifting one gear or the whole range is simple with just a twist of the wrist. They shift a 2:1 Shimano rear derailleur and a SRAM or Shimano derailleur up front.

Replacement PowerGlide rings for 11 speed crankset. - Compatible with Asymmetrical Yaw front derailleurs - Bolt Circle Diameter (BCD): 110 BCD - Material: Aluminum

- 3D forged and CNC machined AL2014 - 4 bolt sculpted faceplate with titanium hardware - 40mm stack height - 113g (100mm)

Low And Lean Made from super-strong 6061-T1 aluminum, the double concave body is sleek and light while still giving your foot a nice wide platform to stand on. Round And Round We Go Fully sealed 4-bearing design makes for smooth rolling rotations over an extremely long life. And the ability to rebuild makes it nearly unkillable. Ride Don't Slide Pins at the front and back of the pedal are angled slightly to provide improved traction and foot comfort. Because pedal bites suck. Look Good Ride Good Our top of the line pedals come in 6 different colors so that you can add as much flavor and flair to your ride as you like. Pedal Envy More than just a trusty platform for stomping landings and railing around berms, the Atlas Pedal has long been Race Face's top contender. It's strong, thin, concave, lightweight, rebuildable, and ideally suited for getting wild in the woods. Specs: - Axle Material: Chromoly Steel - Body Material: 6061 Aluminum - Material: 6061 Aluminum - Platform Height (MM):14.5 - # of Pins: 20 SHCS hex traction pins per pedal (10 per side) - Platform L x W (MM): 114 x 101 - Weight: 355g

These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side. - Hinged clamps for easy installation without removing other components - AL-6061, anodized black - 23 grams - For use only with I-Spec II compatible shifters or dropper lever

Woodchipper is Salsa’s signature drop bar for off road riding, where its unique shape delivers comfort and control no matter how rough the terrain. Woodchipper Bars bend along three planes to create extra-wide lowers while still maintaining a shallow drop. - Lightweight and strong 7050-T6 series aluminum alloy construction - Ergonomic design works well with integrated road shift/brake levers or bar end shifters - 114mm drop, 56mm reach, 25° flare angle, 38° drop angle - Available in 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - The Woodchipper’s non-conventional shape requires a unique setup for optimal comfort. The brake/shifter position should be canted downward slightly, resulting in a 20–25° downward angle of the drops. - Weight: 329g (44cm)

- AL6061-T6 crank with steel chainrings - 7/8sp compatible - 177mm Q-factor - 48.5mm chainline - Spindle Type: 120 SQR JIS

- Thinline: Thinner, longer molded pads for extra clearance and easy adjustment - Red: semi-aggressive compound for good performance - Salmon: aggressive compound for extreme weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

The Body Geometry Comfort Gel is ergonomically designed and scientifically tested to provide unmatched comfort and support while reducing pressure on soft tissue. - Plush foam combined with gel inserts delivers unmatched comfort. - Anatomically designed Body Geometry groove improves blood flow and comfort. - Vacuum formed construction creates a durable and waterproof saddle. - Level 5 padding: Ideal for commuting and casual riding - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.

Shimano Claris front derailleurs offer, smooth easy shifts and are compatible with dual-control road shifters as well as flat-bar style Rapidfire Plus shifters.

Shimano Altus M311 cranksets provide durability and reliable shifting for triple chainring drivetrains. - Hyperdrive SG-X chainrings - 7/8-speed compatible - Spindle interface type: Square Taper JIS

Shimano's Ultegra 10-Speed Cassette delivers pro-level shifting and durability. The computer-enhanced tooth shapes and tough cogs mean you can shift quickly, precisely and smoothly even under pressure.

The Ergon grip with a 2-finger, mini bar end, delivers more hand positions and improved leverage and stability when climbing or during out-of-the-saddle cycling. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP Series, the GP2 eliminates numb hands, aching fingers, and tired forearms. The GP2 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: fiberglass composite with rubber inserts

This mid-rise handlebar provides smooth lines and pure comfort - Black powder coat - 1"(25.4mm) clamp, 5.25" rise, 27" wide - Handmade in Maysville, Kentucky

A day of slicing through sweet ribbons of singletrack on a bike sporting a RockShox 30 Silver will leave you smiling all the way to the bank. Race-proven plushness and ease of setup means more time on the trail and less time tinkering. Lightweight and packed full of legendary RockShox technology, the 30 Silver is sure to boost the level of your ride without boosting your wallet in the process. - TurnKey damper - Crown Race: 30mm - Steerer Tube Length: 265mm - Positive Spring: Coil - Negative Spring: Coil - External Adjustments: Rebound Damping, Low Speed Compression Damping - Maximum Tire Width: 62mm - Maximum tire size: 26 x 2.4"

Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings. - Spindle Interface type: Square Taper JIS

The pinnacle of cross-country cycling performance can be found in the SRAM XX SL T-Type Eagle AXS™ Transmission Power Meter Groupset. Built to serve the most demanding rider’s needs in the lightest weight configuration, XX SL Transmission is the evolution of SRAM's World Champion, World Cup winning XX Eagle AXS™. - AXS™ Pod ULT features a “click and fire” two-button design that transforms the crucial act of rider inputs into a vastly more personal experience for all your AXS™ controls - Engineered as integrated, interdependent transmission components, the XX SL Eagle T-Type rear derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hangerless Interface - XX SL T-Type derailleur offers the same intuitive pairing and set-up procedure as SRAM's Eagle AXS™ derailleur - To further its performance, the lower pulley called, "Magic Wheel", keeps spinning if an object becomes lodged - Derailleur features an overload clutch that accommodates common maintenance - Ultra-lightweight XX SL T-Type 10-52t cassette offers game-changing inboard and outboard shifting performance under load - XX SL Eagle AXS™ T-Type Power Meter crankset boasts SRAMs XX SL carbon crankarm with an integrated power meter to record and deliver live, accurate power readings to your head unit - Power Meter spider-based design is highly accurate, high performing and boasts a long battery life

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

Why We Make This: The simple answer is that many contemporary bicycle frame designs call for the headset bearings to ride inside the frame’s headtube. After decades of making press-in bearing headsets, we needed to make headsets that worked in these newer frames. From the beginning we understood that integrated headsets posed a unique challenge in that the bearings are not pressed into a cup and sit loosely in the frame. When bearings are not pressed securely into a cup they shift and move, rapidly losing preload. As preload drops, the bearings are more susceptible to creaking, damage, and failure. That’s a problem we know how to solve. Why You Want It: Enter, our patented GripLock™ bearing cap. The GripLock™ preloads the headset independently of clamping onto the steerer, so it retains preload far better than the competition and is impervious to the ill effects of load spikes from large hits and heavy braking. This means smoother steering, no more creaking, and a longer lasting headset. Our GripLock™ design also takes the guesswork out of preloading a headset, because the bearing preload force is independent of the clamping force. Our headsets can be preloaded to a torque spec. Compatible with Open, 3T, All City, Low, Cinelli, Lynskey, and more. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517) - 42mm 45x45 upper bearing for 2.8-3.0mm bearing ream depth. - 52mm 45x45 lower bearing - Compatible with our included baseplate and 45 degree integrated crown races